Centerforce is proud to introduce this New Dual Friction clutch
assembly for 2002 to 2005 Chevrolet Cavalier 2.2L and 2005 to 2006
Chevrolet Cobalt 2.2L.

This new clutch assembly replaces the stock pressure plate with a more
reliable assembly with a higher holding capacity that is designed as a
direct bolt in for perfect fit and function.

Centerforce strives to provide the best products on the market at any
performance level by using patented processes and constantly testing
different materials and designs to find the best combination. This new
application is now available as a Dual Friction® clutch assembly for
use in high torque street driving and racing applications and a
Centerforce I for a high quality stock replacement with basic
modifications .

The Dual Friction part number is DF161533 (Pressure Plate, Disc, Slave
Cylinder W/Release Bearing & Alignment Tool Included) the
Centerforce I part number is CF331516 (Pressure Plate, Disc, Slave
Cylinder W/Release Bearing & Alignment Tool Included).

Please contact any Centerforce dealer or Centerforce directly with
questions at 928/771-8422 or visit them online at www.centerforce.com

Justice
Brothers DIESEL FUEL ANTIGEL helps eliminate the forming of waxy solid
crystals in diesel fuel during extreme cold weather conditions. Due to
this fuel’s higher viscosity, it quickly thickens as the temperature
drops to the “cloud point”. This point varies at different locations
but the result is the same, running poorly, and if the temperature
drops an additional twenty degrees, not running at all. As the cold
causes the quantity of crystals to increase, the fuel turns to a gel,
clogging the fuel system.

Justice Brothers DIESEL FUEL ANTIGEL assists in eliminating this
serious problem as well as dispersing water in the filter, preventing
filter icing, and lowering the cold filter plug point by as much as
35-degrees. DIESEL FUEL ANTIGEL also cleans fuel-injectors, lubricates
rotary pumps and increases cetane, providing increased power. At the
start of cold weather, add DIESEL FUEL ANTIGEL to your Diesel fuel
system and keep the liquid flowing.

For over 70-years Justice Brothers has been a supplier of quality
professional care products used worldwide. Manufactured in America,
each Justice Brothers additive and lubricant is custom blended to offer
performance and reliability. Find out more about Justice Brothers at www.justicebrothers.com ,
or contact them at 2734 E. Huntington Drive, Duarte, CA 91010, (626)
359-9174, Fax: (626) 357-2550. Available only at professional car care
centers.

Now track engine rpm in addition to air/fuel data with your FAST™ Air/Fuel Meter

Knowing your engine’s air/fuel ratio is critical to maximizing its
performance. Knowing what rpm that air/fuel ratio is occurring at gives
you the data you need to make precision adjustments to address specific
tuning problems. The FAST™ Air/Fuel Meter RPM Module is an upgrade kit
that lets you monitor and record your engine’s rpm and is fully
compatible with any FAST™ Air/Fuel Meter. It installs with a quick
firmware update to your meter, and the rpm module plugs in-line with
your existing O2 sensor harness. The rpm pick-up is a unique inductive
pick-up design that eliminates any wire cutting to get your rpm signal.

The FAST™ Air/Fuel Meter RPM Module comes with everything you need,
including the installation CD, communications cable, USB cable adapter,
power source, rpm module, clip-on inductive pick-up and full
instructions to get you up and running in no time. Best of all, you’ll
never have to guess what your air/fuel ratio is, or what rpm it occurs
at, ever again.

For more information about the FAST™ Air/Fuel Meter RPM Module or any
other FAST™ product, call us at 1-877-334-8355, or visit us online at www.fuelairspark.com

Leeza
Diehl is proud to announce the release of the Funny Car Summer handbag
sold exclusively through her company Nitro*A*gogo!  

Inspired by drag racing’s fan-favorite class, Diehl has handcrafted a
striking and retro-appealing combination of metal flake vinyls and faux
fur fabrics worthy of any drag strip girl in your life.  The Funny Car
Summer bag features Kustom Tuck 'n Roll design with an inside zippered
pocket, a divided pocket for cell phone, silver grommet-ring strap
eyelets, white stars, matching stripe trim, solid vinyl straps, silver
purse feet and genuine pewter Funny Car zipper pull.

Leeza Diehl, a back-up girl for husband and current IHRA Funny Car
driver Jeff “The Surfer” Diehl, personally handcrafts this as well as
dozens of eye-catching and drag racing inspired accessories. For more
info please visit www.nitroagogo.com

New TCI® valve body allows for total shifting control, ideal for rock crawling, off road and street/strip vehicles.

Making the right shift at the right time is critical to getting the
most performance from your transmission. The new TCI® TH400 Full Manual
Shift Valve Body with Low Gear Engine Braking is the best way to
deliver quick shift response times and clean neutral shifting. Best of
all, the full engine braking in low gear is perfect for rock crawling
and 4x4 applications where utilizing the engine’s compression drag to
help traverse the most extreme terrains is a useful feature.

The TCI® TH400 Full Manual Valve Body with Low Gear Engine Braking is
the perfect set-up not only for heavy off road usage, but is great for
hot street/strip cars where a forward shift pattern valve body ensures
reliable transmission gear selection. As with all TCI® valve bodies,
installation is a simple bolt-in procedure for any GM TH400
transmission with all necessary parts included and performance is
guaranteed due to the rigorous TCI® quality control standards.

For more information about the TCI® TH400 Full Manual Valve Body with
Low Gear Engine Braking or any other TCI® product, call us at
1-888-776-9824, or visit us online at www.tciauto.com

Rapid Response, Less Pressure Drop

BG Fuel Systems (a Barry Grant company) has 2- and 4-port fuel pressure
regulators that provide rapid response times and indiscernible
pressure-drop under extreme competition demands. Both regulators
provide fast recovery after starting line launches, gear changes or
activation of nitrous stages.  

Racers will benefit from increased consistency and improved performance
across the entire power band. Machined from aluminum billet and
anodized for longevity and smart appearance, each 2- and 4-port
regulator (Pt. Nos. 170025 & 170023 respectively) includes a BG
Lifetime Labor Warranty.

For complete information contact:
BG Fuel Systems, 1450 McDonald Road, Dahlonega, GA 30533
Telephone (706) 864-8544.  Visit our website www.barrygrant.com for the latest
Catalog and Technical Manual

Innovative new lifter design yields weight savings and maximum reliability for solid roller equipped Gen III engines

In their never-ending quest to provide the most advanced valve train
products in the world, the COMP Cams® engineering team has recently
introduced a new, improved solid roller tappet to the Endure-X™ line. A
weight savings of 14 grams per tappet over the earlier #8950 Gen III

solid roller tappets means that these ultra-precision quality lifters
will allow your Gen III engine to rev even higher – thanks to
significantly reduced valve train weight. An enhanced, pressure fed
oiling design, including EDM Oil Injection™ to the roller axle and
bearing, ensures long life, even when used in a street application.

The new COMP Cams® Gen III Solid Roller Lifters also feature a Tool
Steel axle, precision-sized needle bearing rollers and rebuildable
design to ensure years of dependable service in even the most demanding
of applications.

The new COMP Cams® Gen III Solid Roller Tappets are suitable for
applications ranging from high performance street to high rpm drag/road
race. They are available individually or in sets of 16 for 1997 to
current LS1, LS2 and LS6 engines and can be run with COMP Cams® Gen III
street and race solid roller camshafts or with any other Gen III solid
roller camshaft.

For more information about the COMP Cams® Solid Roller Tappets for Gen
III Chevrolet engines or any other COMP Cams® product, call us at
1-800-999-0853, or visit us online at www.compcams.com

New “curved jaw” design delivers increased piston skirt contact for a more secure grip

A favorite of both novice and professional engine builders, the
Powerhouse® Products Piston Vise is new and improved for even better
piston grip and overall versatility. Built to handle a wide range of
pistons from small engine to very large bore V8’s, the attractive blue
anodized Powerhouse® Products Piston Vise incorporates a new “curved
jaw” design to increase contact with the piston skirt area and avoid
the delicate ring lands.

The Powerhouse® Products Piston Vise locates and holds the piston by
the wrist pin openings. Once it's set up, you can just drop subsequent
pistons into the vise and lock them in place. It will even hold a
piston upside down for balancing or lightening operations. The compound
angle feature is what truly makes the Powerhouse® Products Piston Vise
unique by not only allowing the piston to rotate from front to back,
but also from side to side (necessary for Ford and Big Block Chevy
pistons). In addition, the ultra-rigid Powerhouse® Products Piston Vice
is perfect for precision piston milling operations such as cutting
valve pockets, and contains provisions for securely fastening the unit
to a milling table.

For more information about the Powerhouse® Products Piston Vise or any
other Powerhouse® product, call us at 1-800-872-7223, or visit us
online at www.powerhouseproducts.com

You
never know what’s going to come out of the shops at Sonny’s Racing
Engines & Components. Believe it or not, this is a small block –
and it pushed out 1,093 hp at 7,900 RPM and 825 ft/lbs of torque at
6,200 with just 13:1 compression! Pour on the nitrous and get ready for
even more!
 
Based upon a billet block punched out to 523 cid,
this baby features a 9.850 deck height with s 4.50 bore center. With an
SREC induction kit which features four 2bbl carbs, this small block is
primed to take you where you’ve never been before. Better yet, SREC can
build versions of this same engine that can range up to 600 cubic
inches.
 
Racers & engine builders, you can buy this or a
similar engine in complete kit form. Bigger really is better – even
with a small block Chevy!
 
For more information, contact:
 
Rod Short, Sales/Marketing Manager - Sonny’s Racing Engines & Components
352 Training Center Rd. Lynchburg, VA  24502
Tel    (434) 239-1009, Fax    (434) 239-1026
Web    www.SonnysRacingEngines.com
E-Mail   rod@sonnysracingengines.com

The
venerable Holley 3310 has been the street carb of choice for nearly
five decades. Its 750cfm flow capacity and vacuum secondaries make it
the ideal carb for both small- and big-block engines. The problem for
most installations is caused by the fact that the 3310 has dual fuel
inlets and traditional dual-feed hard line kits seldom fit correctly,
and often leak. The new Professional Products braided steel line kit
offers an attractive and easy solution for a custom leak-free hook-up.

Each Professional Products braided fuel line kit includes -8AN inlet
fittings that attach to the stock 5/8-18 inverted flare bowl fittings,
using supplied crush washers to ensure a leak-free seat. The braided
stainless line spans the correct 8.8-inches inlet spacing and offers a
show appearance with its anodized fittings. There is an integral
1/8-inch NPT fuel pressure gauge port and an optional adapter is
available to allow use of a -6AN inlet connection or hose barb fittings
for various fuel line sizes.

For more information on Professional Products complete line of fuel
filters, fuel pressure regulators, fuel rails, fuel pumps and other
performance products, or to download the 2007 Catalog in PDF format,
visit www.professional-products.com or contact Professional Products, 12705 S. Van Ness Ave., Hawthorne, Ca. 90250. 323-779-2020 Fax: 323-754-1141.