Created for high-horsepower engines and now available on 24-Hr QuickShip program

Trend Performance is introducing a new series of bronze-insert one-piece pushrods. They are prepared especially for Pro Stock teams, 800 CID Mountain Motor racers, Top Sportsman teams, and large-displacement nitrous engine builders. Further, they are particularly proficient in resolving lubrication troubles around the rocker balls. In addition, BZ pushrods are now available on Trend’s 24-hour QuickShip program.
   
Created from 4130 chrome-molybdenum thick-wall tubes, pre-formed and centerless-ground with a high-load bearing bronze insert, these shelf-stock items are fully heat-treated and available in diameters of 7/16 x .165-inch wall or 1/2 x .200-inch wall or 9/16 x .187-inch wall. On the lifter end they are manufactured with conventional ball-end diameters of 5/16 or 3/8 inch. On the top end, the bronze insert is press-fitted and machined with a .140-inch radius cup—designed to accept the popular 9/32-inch rocker adjuster ball.
   
This new BZ Series is case hardened to Rockwell Rc60 for extra strength and rigidity and made available in straight form, full single taper, or double taper (tapered from the center to the each end)
   
To lubricate the upper cup and rocker ball, a thin oil passageway runs through the center of the pushrod allowing pressurized oil to travel from the lifter bore to the rocker.
   
The heat treating process for the BZ Series is a one-step carbo-nitriding process, administered in an atmospheric furnace containing a combination of ammonia and natural gas. Carbon is induced into the surface of the pushrod from the natural gas, nitride from the ammonia.

For further information, visit www.trendperform.com